IC Programming Services
PCBAMAKE provides IC programming services, allowing you to outsource the programming of integrated circuits (IC), removing the complexity and considerable time burden of programming, introducing increased efficiencies on the SMT assembly and cost savings to customers.
 
Programming can be done after SMT assembly, but this method can only apply for prototype PCB assembly. When it comes to high volume PCB assembly, programming your ICs before assembly will be more competitive, you will enjoy cheap programming price, fast turns and zero defects.
 
In order to maintain high efficiency for our Complete PCB Assembly services,IC programming will be conducted with PCB fabrication, before chips are mounted on the blank PCB board. Our IC programming service supports almost any technology and package in quantities ranging from a small prototype run to large volume production levels. We can provide all commercially available standard sockets, new algorithms as well as specially designed custom sockets. The IC types, IC packages and program file formats we support are listed below:
 
Our Developement Services
We help our customers design and manufacture innovative world-class goods for the high-tech industry, propelling their businesses into new orbits. We also provide ongoing after-sales support through our technical consultants. Designing and manufacturing cutting-edge electronic and automation systems for businesses, industries, and individuals worldwide is our niche.
 
We’ve created a tight-knit team of engineers and managers who specialize in the following prospective markets: E-CAD, firmware development, embedded systems development, power electronics system, IoT during the last five years. We are preparing to take on specific development and production tasks to finish your project on a turnkey basis.
 
E- CAD and EDA Services
•  Schematic and PCB Design
•  High Speed Design with Impendence Control and Length Matching.
•  Various BGA Core (Cortex series, A series, FPGA ...), DDR3, DDR4, Ethernet, eMMC, High Speed Digital Display Interfaces, Wi-Fi…
•  High voltage, High Current Design with EMC/EMI
•  Simulation -Hardware Design Analysis
Software/Firmware Development
•  Firmware development using various kind of MCUs
STM32F1/F4/F7xx, PIC16/18xx, Wi-Fi (ESP32, ESP8266), Bluetooth(nRF52xxx/nRF5281xxx), Zigbee, Atmega series, MSPxxx series
•  Arduino based Firmware
•  Application Stack for RTOS
•  Raspberry PI
•  Device Drivers / Libraries Development
Electronic Product Development
•  Consumer and Industrial IoT devices
•  Automation, Controlling, and Measuring Devices
•  Smart Gadgets and Wearables
•  MCUs and SBCs based PoCs
 
 
Design / Development Software Tools
PCB Design:
Altium，KiCAD，Eagle，Or CAD
 
Firmware Development:
STM32CUBE IDE，MPLAB X，CCS，Keil，Arduino IDE，IAR
 
Simulation:
Proteus，MultiSIM
 
Supported IC types, IC packages and program file format
We can follow your required setting, configurations and the checksum provided to make sure all programming is done properly. IC programming, PCB assembly, coupled with our functional testing service will ensure that your software-driven PCB assemblies work exactly as intended every time.
 
 
Device Types:
MCU/MPU, EPROM, EEPROM, FLASH, Nand Flash, PLD/CPLD, SD Card, TF Card, CF Card, eMMC Card, eMMC, MoviNand and OneNand.
Package Type:
DIP, SDIP, SOP, MSOP, QSOP, SSOP, TSOP, TSSOP, PLCC, QFP, QFN, MLP, MLF, BGA, CSP, SOT and DFN.
Program File:
Binary, Intel Hex, Motorola S-Records, Tektronix, Extended Tektronix, POF
 
Taping & Reeling | Dry Packing after IC Programming
The non-standard components may be not applicable for high-efficient PCB assembly, then you may require to make tape and reel. Yes, PCBAMAKE provides component taping and reeling service. The automatic machines use vision-controlled device placement in the tape, checking for pin orientation. Custom tape and reel packaging enable transferring manual insertion to automatic placement during the SMT process, which contributes to time and money savings. Besides, dry packing service is also available for moisture sensitive devices.
 
Outsource your IC programming to PCBAMAKE and you'll benefit from reduced costs, increased productivity and an integrated supply chain. We program, tape & reel your ICs and dry them in packaging, assemble and test your PCB assemblies to improve our efficiency of turnkey PCB assembly service, and that’s why we can guarantee rapid delivery to help you meet your product launching deadlines.
 
 

FAQ

Q

How long have you been making PCB&PCBA?

A

PCBAMake has been making PCBs for more than 26 years.We built our assembly plant and begin assembly business in 1996.

Q

How do I get a quick quote for PCB or PCB assembly?

A

Please send your files and requirements to Orders@pcbamake.com.Quote will be sent back as soon as we get through an evaluation.

Q

Do you cater SMT prototype boards?

A

Yes, we are fully equipped to handle your any kind of custom SMT prototype board requirements.MOQ is 10 PCS.

Q

What files and documents do you request for my PCBA orders?

A

Gerber Files/Bill of Materials, complete information in excel format/Centroid Data/Other requirements or assembly instructions if applicable.

WHAT CAN I DO FOR YOU ?

   * Only zip or rar files accepted. Max 18MB.

Submit

Home
Hotline
Enquiry
Contact